Kevlar Hurricane Screen CostWhat you pay in coastal NC and SC
Kevlar hurricane screens cost $48 per square foot installed, plus $700 for each opening with a motor, so an 8-foot slider screen runs $3,072 manual or $3,772 motorized. The fabric we install is Twitchell OmegaTex, a 50 percent aramid hurricane fabric, on the Alutech StormTex system.
The price
How hurricane screens are priced
We price hurricane screens the same way as every other shutter we install: by the square foot of the opening, installed. The price covers the fabric, the hood, the side tracks, the bottom bar, the anchors, the labor, the engineering for your opening and the building permit. The only additions are a motor, if you want one, and smart home control.
| Hurricane screen | $48 per sq ft installed |
| Motor | $700 per opening |
| Smart home integration | $250 to $450, once per home |
| Permit | Included |
| Lead time | 1 to 3 months |
Square footage is the width times the height of the opening the screen covers. A screen that overlaps the opening on each side is measured to the screen, not the glass, and we show you the measurements on the quote.
Lanai opening, 18 ft by 9 ft (162 sq ft): $7,776 manual, $8,476 motorized.
Lanai with three 16 ft by 9 ft openings (432 sq ft): $20,736 manual, $22,836 motorized.
The fabric
Kevlar, aramid and what we actually install
Kevlar is a brand name for aramid fiber, the same family of fiber used in protective gear. “Kevlar hurricane screen” has become the everyday name for any hurricane fabric built with aramid, whoever made it. The fabric we install is Twitchell OmegaTex, which is 50 percent aramid, woven into a mesh that stops wind-borne debris while letting light through.
The fabric is only half the system. We hang it on the Alutech StormTex track system: the fabric edge is welded to a keder that runs inside the side rails, a tension spring keeps it tight, and the hood at the top holds the fabric rolled up when you do not need it. That track is what lets a wide screen take hurricane-force wind without pulling out of its rails. The same frame also takes everyday sun and insect fabric for motorized patio and porch screens.
How wide can one screen be?
We aim for a maximum of 18 feet wide per screen. Wider screens are approved, but past that point the install gets harder and the screen puts more sag and strain on the beam or header it hangs from. On a wider lanai we split the opening into two or more screens.
Compared
Screens against other shutters
Per square foot, hurricane screens sit in the middle of what we install. Accordion shutters are $38, roll down shutters are $52 and hurricane screens are $48, with the same $700 per opening for a motor on roll downs and screens. Screens make the most sense on big openings, like lanais, porches and walls of sliders, where they cover a large area with a single screen and roll out of sight when the weather is good.
On a row of ordinary windows, accordions usually cost less and do the job just as well. See the 2027 price guide for every product side by side.
When hurricane screens are the wrong choice
Screens shine on big openings. Here is when another shutter is the better buy.
Kevlar hurricane screen cost questions
Why homeowners call AHS
Family-owned since 2006, with our own crews on every job.
Price Your Screens
Book a free estimate. We measure every opening and quote it at $48 per square foot, plus $700 for each motor you want.
- How to Lubricate Accordion Shutters | Pro Tips | AHS - April 17, 2026
- Design Guide: Best Hurricane Shutters & Colors for Brick Homes | AHS - April 16, 2026
- Get the Miami Look: Bahama Shutter Styles for Your Carolina Home - April 15, 2026
